Tips for Grass Seeding


A beautiful and healthy lawn is good for our environment. It can resist damage from weeds, disease and insect pests and reduces the environmental impact from storm water runoff.

Before seeding a new lawn from scratch, here are some tips to prepare your soil for grass seeding:
  1. Develop healthy soil. Make sure your soil has the right pH balance, key nutrients, and good texture. You can buy easy-to-use soil analysis kits at hardware stores, or your local township or county may be able to provide a soil analysis service.
  2. Choose the right grass seed type for your climate. If your area gets very little rain, don't plant a type of grass that needs a lot of water. Select grass seed that is well suited to your climate and other growing conditions, such as the amount of sunlight and rain you lawn receives.
  3. Do the first tilling of your lawn area. Change any areas that may help provide a more level, properly sloped lawn area. An ideal lawn slope allows water to gently run off of the site, usually at a slope of 1-2 foot drop per 100 feet (1-2% slope).
  4. Apply any organic amendments and/or topsoils to change the soil composition and texture.
  5. Install any lawn sprinkler systems you wish to have in your lawn. A lawn sprinkler system uses water more efficiently than doing it manually, and can save you money on your water bill.
  6. Rake the lawn area smooth prior to seeding grass, ideally with the top 1-2 inches of the soil being very fine composition.

You are now ready to seed your lawn. The best time to sow grass seed is during Fall (for cool-season grass types) or early Spring (for warm-season grasses).
  1. How to seed: Don’t sow grass seed by hand - use a hand-operated or wheel-mounted seeder.
  2. Calculate the amount of grass seed you will need, according to the manufacturer’s instructions.
  3. Consider sowing half of the grass seed in one direction, then sow the other half at a 90-degree angle to the first. This will give you a more even coverage and minimize lines.
  4. Lightly rake the seeded area so that as many of the grass seeds as possible are lightly covered (1/4 inch is an ideal covering for grasses).
  5. Water once or twice a day until the grass becomes established.

Over-seed your lawn each Fall by spreading additional grass seed on top of the lawn. A thicker lawn helps to crowd out weeds.

test image for this block